HDR AV Switcher

Video

Input Signal Types

HDMI with HDR10, HDR10+, Dolby Vision, Deep Colour, 4K60 4:4:4: support1, 2 (DVI and Dual-Mode Display Port interface compatible3)

Output Signal Types

HDMI with HDR10, HDR10+, Dolby Vision, Deep Colour, and 4K60 4:4:4 support1, 2 (DVI compatible4)

Switcher

4x4 digital AV switcher

Copy Protection

HDCP 2.3

Audio - General

Digital-to Analog Conversion

24-bit 48 kHz

Frequency Response

±0.5 dB. 20 Hz to 20 kHz

THD+N

<0.005%, 1 kHz, 10 dBV

S/N Ratio

>95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted

Crosstalk

≤90 dB, 1 KHz, for multiple inputs only

Stereo Separation

≤80 dB, 20 Hz to 20 kHz

Audio - Source Inputs

Input Signal Type

HDMI (Dual-Mode DisplayPort interface
compatible3)

Formats

Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTSHD Master Audio, DTS:X, LPCM up to 8 channels

Audio - Digital Output

Output Signal Type

HDMI

Formats

Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTSES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels

Source

a.    -80 dB to +20 dB adjustment range, plus Mute

Master Volume

a.    -80 dB to +20 dB adjustment range, plus Mute

Audio - Analog Line Output

Output Signal Type/Format

Stereo 2-channel

Volume Control

a.   -80 dB to +20 dB adjustment range, plus Mute, Mono, and Stereo

Communications

Ethernet

100/1000 Mbps, auto-switching, auto-negotiating, auto discovery, full/half duplex, DHCP, Web browser setup and control, control system integration, 802.1X, Secure CIP, Authentication, SSH/SSL, TLS

USB

For firmware loading and configuration management and to power a USB powered device

HDMI

HDCP 2.3, EDID, CEС

Connectors

HDMI IN 1-4

19-pin Type A connector, female; HDMI digital video/audio inputs (DVI and Dual-Mode Display Port interface compatible3)

HDMI OUT 1-4

19-pin Type A connector, female; HDMI digital video/audio outputs (DVI compatible4)

AUDIO OUT, AUX 1-2

5-pin 3.5 mm detachable terminal block; Balanced /unbalanced stereo line-level audio output; Output Impedance: <100 Ohms; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

LAN POE+

8-pin RJ-45 female; 100BASE-TX/1000BASE-T Ethernet port; IEEE 802.3at Type 2 Class 4 (25.5 W) PoE+ compliant, capable of being powered by PoE+ power sourcing equipment (PSE)5

24 VDC 2.5 A

2.1 x 5.5 mm DC power connector; 24 VDC power input;

SERVICE

USB Type A female; Should provide up to 5 V 500 mA power to USB powered device

Controls and Indicators

NPUT 1-4

Push buttons for manual input selection and (4) LEDs.

OUTPUT 1-4

Push buttons for manual output selection and (4) LEDs.

SETUP

Red LED and (1) push button for display of IP address on connected HDMI outputs

Ethernet

LEDs on RJ-45 LAN connector.

Power

PoE+

IEEE 802.3at Type 2 Class 4 (25.5 W) PoE+ compliant, capable of being powered by PoE + power sourcing equipment (PSE)

Power Pack (Optional)

Input: 1.3 A (maximum)' 100-240 VAC, 50/60 Hz; Output: 2.5 A' 24 VDC;

Power Consumption

17 W typical

Environmental

Temperature

32° to 104° F (0° to 40° C)

Humidity

10% to 90% RH (noncondensing)

Heat Dissipation

58 BTU/hr typical

Acoustic Noise

33.55 dВА

Warranty

3 Years