Digital Signal Processors

Digital Signal Processor (DSP)

• Open Architecture Digital Signal Processor.

• Should support 256x256 Network Audio Channels via Dante/AES67 or similar protocol to support integrate network Microphones.

• Speakers, I/O Expanders and Amplifiers

• AEC Channels - 64 or more with 200ms tail length.

• Dante channel supports 128x128 channels or more.

• VOIP Softphone instance 64 or more for Audio Conferencing.

• Dual gigabit Ethernet ports for redundant networked audio or better.

• The processor should support Network amplifiers without any additional cards or accessories.

• In built amplifier. Additional amplifier, if required, will be supplied by seller.

Audio Output

1 x 3-pin terminal (fits Phoenix contact MCVW 1.5- 3-ST-3.81) 1x Digital Dante Network Audio (RJ-45)

Ethernet / Control

1 x RJ-45 Ethernet Port for PoE power supply and data/control communication

Supply voltage

PoE IEEE 802.3af Class 3 or PoE IEEE 802.3at/ Type 2/ Class 4 (when cascaded)

Power consumption

approx. 8 W

Dimensions (Øx H)

407 x 46 mm

Temperature

Operation: 0 - 40°C (32-104 °F)
Storage: -10- 60°C (14 - 140 °F)

Relative air humidity

20-95%, non-condensing

Safety certification

IEC/EN 62368-1 (including UL 2043 testing and compliance)

Warranty

3 Years